Each layer is 200mm tall. You can stack as many layers on top of each other as you like. All parts interconnect with one another to form one solid bed.
STEP 1 Place two pieces flat on the ground, arm(s) pointing up
STEP 2 Join the pieces with the connector plate
Insert connector plate under the lip & align the holes
Put a screw in the holes on either side of the join starting at the top and finish at the bottom
STEP 3 Repeat step 1 & 2 for the other side
STEP 5 Position the pieces and join together
STEP 6 Repeat step 1 to 4 for each layer
STEP 7 Place layers on top of each other and join the layers together
Tip: When you make a rectangle or square, make two halves first. When completed, combine the two halves.
Pro – tip: For a superior finish at the top, use Phillips truss head screws or use pop rivets.
If you plan to use more than one extenders, you need to buy the additional braces that run internall from one side to the other. This prevents the boxes from bulging out.
Available in weathering steel and galvanised steel.