Level the base before you start; compacting the base is recommended. This product can be used on a sandy base as well as on compacted roadbase. Note: This edge allows gentle sloping.
STEP 1 Place the edges on the ground roughly where they’ll need to be. STEP 2 Join all edges together with Tek screws or pop-rivets. STEP 3 Position and secure edge with the supplied twisted nails. STEP 4 Backfill against the edge.
Tip: When you compact a base like sand or gravel, point the feet inwards and compact on the feet. This increases the strength of the edge.
RIGHT ANGLE CORNER
If you want to make a right angle corner, simply select a slot where you want it to bend and force it by hand. If you want to make a corner simply select the slot where you want to bend it, raise or push down one of the adjacent feet so it can slide past the other then use force of hand to effect the bend. Bend it a little too far then bend it back. If other slots also bend, use a rubber mallet to gently tap them back into shape.
Tip: Also check the video in the next tab!
MINIMUM CURVE RADIUS
The minimum radius for curves or circles that can be formed with this product is 35cm.