Lawn barrier for invasive grasses for extra height.
Raised feature beds
Raised, curved feature beds.
Terracing a gentle slope.
Hard surface mounting ie rooftop gardens/decking.
Create a level installation base/trench.
STEP 1 Place two edges on the ground. STEP 2 Join the edges with the join set. • Insert join bracket under the top lip. • Be sure to start from the bottom edge slot first. Tip: use of cardboard or similar under the edges when joining is recommended to avoid trapping grasses/leaves in the seam STEP 3 Set edges upright and position where desired. STEP 4 Use twisted nails to secure foot and hold shape. STEP 5 Hammer the posts in adjacent to the bottom foot. STEP 6 Secure the fix lip as shown.
Tip 1: In soft sandy soils, a little quick set concrete around the nails makes a huge difference. Tip 2: Making straight lines is much harder than sweeping curves, consider your design before you start!